Wi-Fi Extender How To Setup Wi-Fi Extender Estimated reading: 2 minutes 399 views The quick set up guide can be found inside the Wi-Fi Extender box as well. For your reference, you may refer to the written guide as per below. Method 1: Via a Web Browser Plug the extender into a power outlet near your router. Wait until its Signal LED turns on with a solid light (not blinking). Connect your wireless device to the extender (MERCUSYS_RE_XXXX). Do note, the default SSID (network name) is printed on the product label at the back of the extender. Open your web browser and visit http://mwlogin.net. Create a password to log in. Follow the web instructions to complete the setup. The signal LED should turn solid green or orange, indicating a successful connection to you router. Plug in the extender about halfway between your router and the Wi-Fi dead zone. The location you choose must still be within the range of your initial router. Wait for about 2 minutes until the Signal LED turns solid green. If it doesn’t, relocate the extender closer to the router to achieve better signal quality. Method 2: Via the WPS Button Plug the extender into a power outlet near your router. Wait until its Signal LED turns on with a solid light (not blinking). Press the WPS button on your router. Within 2 minutes, press the WPS or RESET/WPS button on the extender for 1 second. The signal LED should change from blinking to solid green or orange indicating a successful connection to your router. Note, if the LED does not turn solid green or orange, try again or use Method 1. Plug in the extender about halfway between your router and the Wi-Fi dead zone. The location you choose must still be within the range of your initial router. Wait for about 2 minutes until the Signal LED turns solid green. If it doesn’t, relocate the extender closer to the router to achieve better signal quality.
